Network UPS Tools
Power Devices support
Table of Contents

Click here to see reports of other supported models from APC.

Note

When a user reports that a variable/command is not right then it will be highlighted by a red underline.

Bad values/ranges/etc… will get a red dashed outline or red solid left border.

The accompanying explaining comment - if provided - will be emphasized through a red dotted border on the left.

2.2.0

Report #1 with driver usbhid-ups (detailed comments available)

This device is known to work with driver usbhid-ups.

You can grab a dummy-ups compliant .dev file to simulate this device clicking here.

Some more detailed comments are available after the "Known supported…" sections.

Known supported variables

This device is known to support the following variables (values are just examples):

battery.charge

100

battery.charge.low

10

battery.charge.warning

50

battery.date

not set

battery.mfr.date

2007/01/17

battery.runtime

2812

battery.runtime.low

120

battery.type

PbAc

battery.voltage

13.4

battery.voltage.nominal

12.0

driver.name

usbhid-ups

driver.parameter.pollinterval

2

driver.parameter.port

auto

driver.version

2.2.0-

driver.version.data

APC/CyberPower HID 0.9

driver.version.internal

0.30

input.transfer.high

139

input.transfer.low

88

input.voltage

121.0

input.voltage.nominal

120

ups.beeper.status

enabled

ups.delay.shutdown

-1

ups.firmware

840.B2.D

ups.firmware.aux

B2

ups.load

0

ups.mfr

APC

ups.mfr.date

2007/01/17

ups.model

Back-UPS ES 550

ups.productid

0002

ups.serial

3B0703X25849

ups.status

OL

ups.vendorid

051d