Network UPS Tools
Power Devices support
Table of Contents

Click here to see reports of other supported models from Aviem Systems.

Note

When a user reports that a variable/command is not right then it will be highlighted by a red underline.

Bad values/ranges/etc… will get a red dashed outline or red solid left border.

The accompanying explaining comment - if provided - will be emphasized through a red dotted border on the left.

2.6.3

Report #1 with driver blazer_ser (detailed comments available)

This device is known to work with driver blazer_ser. It may also work with driver nutdrv_qx.

You can grab a dummy-ups compliant .dev file to simulate this device clicking here.

Some more detailed comments are available after the "Known supported…" sections.

Known supported variables

This device is known to support the following variables (values are just examples):

battery.voltage

24.96

battery.voltage.low

21.5

battery.voltage.nominal

24.0

beeper.status

enabled

device.mfr


device.model


device.type

ups

driver.name

blazer_ser

driver.parameter.pollinterval

2

driver.parameter.port

/dev/ttyUSB1

driver.version

2.6.3

driver.version.internal

1.51

input.current.nominal

5.0

input.frequency

50.0

input.frequency.nominal

50

input.voltage

224.3

input.voltage.fault

0.0

input.voltage.nominal

220

output.voltage

230.7

ups.delay.shutdown

30

ups.delay.start

180

ups.firmware

R1.1.1

ups.load

11

ups.mfr


ups.model


ups.status

OL BYPASS

ups.temperature

35.0

ups.type

online