Network UPS Tools
Power Devices support
Table of Contents

Click here to see reports of other supported models from Belkin.

Note

When a user reports that a variable/command is not right then it will be highlighted by a red underline.

Bad values/ranges/etc… will get a red dashed outline or red solid left border.

The accompanying explaining comment - if provided - will be emphasized through a red dotted border on the left.

2.0.2

Report #1 with driver newhidups (detailed comments available)

This device is known to work with driver newhidups, now replaced by the usbhid-ups one.

You can grab a dummy-ups compliant .dev file to simulate this device clicking here.

Some more detailed comments are available after the "Known supported…" sections.

Known supported variables

This device is known to support the following variables (values are just examples):

battery.charge

75

battery.charge.low

30

battery.charge.warning

50

battery.runtime

210

battery.voltage

26.1

battery.voltage.nominal

24

driver.name

newhidups

driver.parameter.port

auto

driver.version

2.0.2

driver.version.data

Belkin HID 0.1

driver.version.internal

0.27

input.frequency

59.9

input.frequency.nominal

60

input.sensitivity

reduced

input.transfer.high

136

input.transfer.high.max

0

input.transfer.high.min

1536

This is a garbage value created by a previous crash of the UPS firmware - should be 0.

input.transfer.low

90

input.transfer.low.max

0

input.transfer.low.min

0

input.voltage

117.4

input.voltage.nominal

120

output.frequency

59.9

output.voltage

118.1

ups.beeper.status

enabled

ups.delay.restart

0

ups.delay.shutdown

2

ups.devicechemistry

PbAc

ups.firmware

4

ups.load

0

ups.mfr

Belkin

ups.mfr.date

2002/03/01

ups.model

UPS

ups.power.nominal

800

ups.serial

unknown

ups.serial.internal

D2002337105

ups.status

OL CHRG

ups.test.result

Done and passed

ups.type

offline

Known supported commands

This device is known to support the following NUT’s instant commands:

  • beeper.off

  • beeper.on

  • load.off

  • test.battery.start.deep

  • test.battery.start.quick

  • test.battery.stop