Network UPS Tools
Power Devices support
Table of Contents

Click here to see reports of other supported models from Cyber Power Systems.

Note

When a user reports that a variable/command is not right then it will be highlighted by a red underline.

Bad values/ranges/etc… will get a red dashed outline or red solid left border.

The accompanying explaining comment - if provided - will be emphasized through a red dotted border on the left.

2.6.5

Report #1 with driver usbhid-ups (detailed comments available)

This device is known to work with driver usbhid-ups.

You can grab a dummy-ups compliant .dev file to simulate this device clicking here.

Some more detailed comments are available after the "Known supported…" sections.

Known supported variables

This device is known to support the following variables (values are just examples):

battery.charge

93

battery.charge.low

10

battery.charge.warning

20

battery.mfr.date

CPS

battery.runtime

2572

battery.runtime.low

300

battery.type

PbAcid

battery.voltage

12.1

battery.voltage.nominal

12

device.mfr

CPS

device.model

CP 1000D

device.type

ups

driver.name

usbhid-ups

driver.parameter.pollfreq

30

driver.parameter.pollinterval

2

driver.parameter.port

/dev/ugen1.3

driver.version

2.6.5

driver.version.data

CyberPower HID 0.3

driver.version.internal

0.37

input.transfer.high

140

input.transfer.low

90

input.voltage

0.0

input.voltage.nominal

120

output.voltage

120.0

ups.beeper.status

enabled

ups.delay.shutdown

20

ups.delay.start

30

ups.load

13

ups.mfr

CPS

ups.model

CP 1000D

ups.productid

0501

ups.realpower.nominal

68

ups.status

OB DISCHRG

ups.test.result

Done and passed

ups.timer.shutdown

-60

ups.timer.start

0

ups.vendorid

0764