Network UPS Tools
Power Devices support
Table of Contents

Click here to see reports of other supported models from Geek Squad.

Note

When a user reports that a variable/command is not right then it will be highlighted by a red underline.

Bad values/ranges/etc… will get a red dashed outline or red solid left border.

The accompanying explaining comment - if provided - will be emphasized through a red dotted border on the left.

2.0.5

Report #1 with driver newhidups (detailed comments available)

This device is known to work with driver newhidups, now replaced by the usbhid-ups one.

You can grab a dummy-ups compliant .dev file to simulate this device clicking here.

Some more detailed comments are available after the "Known supported…" sections.

Known supported variables

This device is known to support the following variables (values are just examples):

battery.charge

100

battery.charge.low

10

battery.charge.warning

20

battery.runtime

4251

battery.runtime.low

600

battery.type

PbAcid

battery.voltage

20.9

battery.voltage.nominal

12.0

driver.name

newhidups

driver.parameter.port

auto

driver.version

2.0.5

driver.version.data

APC/CyberPower HID 0.9

driver.version.internal

0.30

input.transfer.high

140

input.transfer.low

90

input.voltage

121.0

input.voltage.nominal

120

output.voltage

121.0

ups.beeper.status

enabled

ups.delay.shutdown

-60

ups.load

6.0

ups.mfr

CPS

ups.model

GS 1285U

ups.power.nominal

337

ups.status

OL

ups.test.result

Done and passed