Network UPS Tools
Power Devices support
Table of Contents

Click here to see reports of other supported models from Grafenthal.

Note

When a user reports that a variable/command is not right then it will be highlighted by a red underline.

Bad values/ranges/etc… will get a red dashed outline or red solid left border.

The accompanying explaining comment - if provided - will be emphasized through a red dotted border on the left.

2.6.5

Report #1 with driver snmp-ups (detailed comments available)

This device is known to work with driver snmp-ups.

You can grab a dummy-ups compliant .dev file to simulate this device clicking here.

Some more detailed comments are available after the "Known supported…" sections.

Known supported variables

This device is known to support the following variables (values are just examples):

battery.charge

0.00

battery.current

0.00

battery.runtime

0.00

battery.runtime.low

7200.00

battery.temperature

21.00

battery.voltage

2.10

device.mfr

device.model

HV 3K

device.type

ups

driver.name

snmp-ups

driver.parameter.pollinterval

2

driver.parameter.port

192.168.4.32

driver.version

2.6.5-3723:3731M

driver.version.data

ietf MIB 1.4

driver.version.internal

0.68

input.bypass.phases

0.00

input.current

0.00

input.frequency

50.00

input.frequency.nominal

50.00

input.phases

1.00

input.realpower

0.00

input.transfer.high

0.00

input.transfer.low

0.00

input.voltage

224.00

input.voltage.nominal

2300.00

output.current

0.00

output.frequency

50.00

output.frequency.nominal

50.00

output.phases

1.00

output.power.nominal

2990.00

output.realpower

0.00

output.realpower.nominal

0.00

output.voltage

230.00

output.voltage.nominal

2300.00

ups.beeper.status

enabled

ups.firmware

00204.02

ups.firmware.aux

3.2.DX520.c

ups.load

9.00

ups.mfr

ups.model

HV 3K

ups.start.auto

no

ups.status

OL

ups.test.result

done and passed

ups.timer.reboot

-1

This variable can be set through upsrw to a string value.

ups.timer.shutdown

-1

This variable can be set through upsrw to a string value.

ups.timer.start

-1

This variable can be set through upsrw to a string value.

Known supported commands

This device is known to support the following NUT’s instant commands:

  • beeper.disable

  • beeper.enable

  • beeper.mute

  • load.off

  • load.on

  • test.battery.start

  • test.battery.start.deep

  • test.battery.start.quick

  • test.battery.stop