Network UPS Tools
Power Devices support
Table of Contents

Click here to see reports of other supported models from JAWAN.

Note

When a user reports that a variable/command is not right then it will be highlighted by a red underline.

Bad values/ranges/etc… will get a red dashed outline or red solid left border.

The accompanying explaining comment - if provided - will be emphasized through a red dotted border on the left.

2.7.2

Report #1 with driver blazer_usb (detailed comments available)

This device is known to work with driver blazer_usb. It may also work with driver nutdrv_qx.

You can grab a dummy-ups compliant .dev file to simulate this device clicking here.

Some more detailed comments are available after the "Known supported…" sections.

Known supported variables

This device is known to support the following variables (values are just examples):

battery.charge

100

battery.voltage

13.60

battery.voltage.high

13

battery.voltage.low

10.4

battery.voltage.nominal

12.0

device.mfr


device.model


device.type

ups

driver.name

blazer_usb

driver.parameter.chargetime

43200

driver.parameter.pollinterval

2

driver.parameter.port

auto

driver.parameter.productid

5161

driver.parameter.vendorid

0665

driver.version

2.7.2

driver.version.internal

0.11

input.current.nominal

6.0

input.frequency

60.0

input.frequency.nominal

60

input.voltage

118.0

input.voltage.fault

118.0

input.voltage.nominal

115

output.voltage

118.0

ups.beeper.status

disabled

ups.delay.shutdown

30

ups.delay.start

180

ups.firmware

B1.12_APFB

ups.load

29

ups.mfr


ups.model


ups.productid

5161

ups.status

OL

ups.temperature

32.0

ups.type

offline / line interactive

ups.vendorid

0665

Known supported commands

This device is known to support the following NUT’s instant commands:

  • beeper.toggle

  • load.off

  • load.on

  • shutdown.return

  • shutdown.stayoff

  • shutdown.stop

  • test.battery.start

  • test.battery.start.deep

  • test.battery.start.quick

  • test.battery.stop

About this device

  • Q1 / Megatec protocol

  • Product Description from "nut-scanner" : " WayTech USB-RS232 Interface (V1.0) Baud rate 2400bps"

Reported at: