Network UPS Tools
Power Devices support
Table of Contents

Click here to see reports of other supported models from Novex.

Note

When a user reports that a variable/command is not right then it will be highlighted by a red underline.

Bad values/ranges/etc… will get a red dashed outline or red solid left border.

The accompanying explaining comment - if provided - will be emphasized through a red dotted border on the left.

2.6.5

Report #1 with driver blazer_usb (detailed comments available)

This device is known to work with driver blazer_usb. It may also work with driver nutdrv_qx.

You can grab a dummy-ups compliant .dev file to simulate this device clicking here.

Some more detailed comments are available after the "Known supported…" sections.

Known supported variables

This device is known to support the following variables (values are just examples):

battery.charge

100

battery.voltage

13.00

battery.voltage.high

12.70

battery.voltage.low

11.2

battery.voltage.nominal

11.5

device.mfr

NOVEX

device.model

UPS650

device.type

ups

driver.name

blazer_usb

driver.parameter.pollinterval

2

driver.parameter.port

auto

driver.parameter.protocol

megatec

driver.version

2.6.5

driver.version.internal

0.09

input.current.nominal

4.0

input.frequency

49.8

input.frequency.nominal

50

input.voltage

223.0

input.voltage.fault

165.0

input.voltage.nominal

220

output.voltage

223.0

ups.alarm

Shutdown imminent!

ups.beeper.status

disabled

ups.delay.shutdown

30

ups.delay.start

180

ups.firmware

VER3.10C

ups.load

0

ups.mfr

NOVEX

ups.model

UPS650

ups.productid

0000

ups.status

ALARM OL FSD

ups.temperature

0.0

ups.type

offline / line interactive

ups.vendorid

0001