Network UPS Tools
Power Devices support
Table of Contents

Click here to see reports of other supported models from Plexus.

Note

When a user reports that a variable/command is not right then it will be highlighted by a red underline.

Bad values/ranges/etc… will get a red dashed outline or red solid left border.

The accompanying explaining comment - if provided - will be emphasized through a red dotted border on the left.

2.2.1

Report #1 with driver megatec_usb (detailed comments available)

This device is known to work with driver megatec_usb, now replaced by the blazer_usb one. It may also work with driver nutdrv_qx.

You can grab a dummy-ups compliant .dev file to simulate this device clicking here.

Some more detailed comments are available after the "Known supported…" sections.

Known supported variables

This device is known to support the following variables (values are just examples):

battery.charge

89.8

battery.voltage

11.50

battery.voltage.nominal

11.5

driver.name

megatec_usb

driver.parameter.battvolts

0.0:12.8

driver.parameter.mfr

Plexus

driver.parameter.model

500VA

driver.parameter.pollinterval

2

driver.parameter.port

/dev/usb/hiddev0

driver.parameter.vendorid

0001

driver.version

2.2.1-

driver.version.internal

1.5.9

input.frequency

50.0

input.voltage

0.0

input.voltage.fault

165.0

output.voltage

230.0

output.voltage.nominal

230.0

ups.beeper.status

disabled

ups.delay.shutdown

0

ups.delay.start

2

ups.load

100.0

ups.mfr

Plexus

ups.model

500VA

ups.serial

unknown

ups.status

OB

ups.temperature

0.0

Known supported commands

This device is known to support the following NUT’s instant commands:

  • beeper.toggle

  • load.off

    Not working

  • load.on

    Not working

  • reset.input.minmax

    Not tested

  • reset.watchdog

    Not tested

  • shutdown.return

    Not working

  • shutdown.stayoff

    Not working

  • shutdown.stop

    Not working

  • test.battery.start

    Not working

  • test.battery.start.deep

    Not working

  • test.battery.stop

    Not working