Network UPS Tools
Power Devices support
Table of Contents

Click here to see reports of other supported models from PowerTech.

Note

When a user reports that a variable/command is not right then it will be highlighted by a red underline.

Bad values/ranges/etc… will get a red dashed outline or red solid left border.

The accompanying explaining comment - if provided - will be emphasized through a red dotted border on the left.

2.0.5

Report #1 with driver megatec (detailed comments available)

This device is known to work with driver megatec, now replaced by the blazer_ser one. It may also work with driver nutdrv_qx.

You can grab a dummy-ups compliant .dev file to simulate this device clicking here.

Some more detailed comments are available after the "Known supported…" sections.

Known supported variables

This device is known to support the following variables (values are just examples):

battery.charge

100.0

battery.voltage

2.40

battery.voltage.nominal

24.0

driver.name

megatec

driver.parameter.port

/dev/ttyS0

driver.version

2.0.5

driver.version.internal

1.5

input.frequency

50.0

input.voltage

253.0

input.voltage.fault

253.0

input.voltage.maximum

253.0

input.voltage.minimum

252.0

output.voltage

252.0

output.voltage.nominal

240.0

ups.beeper.status

disabled

ups.delay.shutdown

0

ups.delay.start

2

ups.load

38.0

ups.mfr

M+H

ups.model

SMK-800 2000 V6.2

ups.serial

unknown

ups.status

OL

ups.temperature

27.0

2.0.4

Report #1 with driver fentonups (detailed comments available)

This device is known to work with driver fentonups, now replaced by the blazer_ser one. It may also work with driver nutdrv_qx.

You can grab a dummy-ups compliant .dev file to simulate this device clicking here.

Some more detailed comments are available after the "Known supported…" sections.

Known supported variables

This device is known to support the following variables (values are just examples):

battery.charge

100.0

battery.voltage

2.40

driver.name

fentonups

driver.parameter.port

/dev/ttyS0

driver.version

2.0.4

driver.version.internal

1.22

input.frequency

50.0

input.voltage

246.0

output.voltage

247.0

ups.load

038

ups.mfr

M+H

ups.model

Unknown MK-800

ups.status

OL