Network UPS Tools
Power Devices support
Table of Contents

Click here to see reports of other supported models from PowerWalker.

Note

When a user reports that a variable/command is not right then it will be highlighted by a red underline.

Bad values/ranges/etc… will get a red dashed outline or red solid left border.

The accompanying explaining comment - if provided - will be emphasized through a red dotted border on the left.

2.3.0

Report #1 with driver megatec_usb (detailed comments available)

This device is known to work with driver megatec_usb, now replaced by the blazer_usb one. It may also work with driver nutdrv_qx.

You can grab a dummy-ups compliant .dev file to simulate this device clicking here.

Some more detailed comments are available after the "Known supported…" sections.

Known supported variables

This device is known to support the following variables (values are just examples):

battery.charge

87.5

battery.voltage

13.20

battery.voltage.nominal

12.0

driver.name

megatec_usb

driver.parameter.pollinterval

2

driver.parameter.port

auto

driver.version

2.3.0-1154:1163M

driver.version.internal

1.5.9

input.frequency

50.1

input.voltage

231.1

input.voltage.fault

231.1

input.voltage.maximum

232.0

input.voltage.minimum

230.2

output.voltage

230.7

output.voltage.nominal

230.0

ups.beeper.status

disabled

ups.delay.shutdown

0

ups.delay.start

2

ups.load

30.0

ups.mfr

unknown

ups.model

unknown

ups.serial

unknown

ups.status

OL

ups.temperature

25.0

2.0.3

Report #1 with driver mustek (detailed comments available)

This device is known to work with driver mustek, now replaced by the blazer_ser one. It may also work with driver nutdrv_qx.

You can grab a dummy-ups compliant .dev file to simulate this device clicking here.

Some more detailed comments are available after the "Known supported…" sections.

Known supported variables

This device is known to support the following variables (values are just examples):

battery.charge

97.5

battery.voltage

13.6

driver.name

mustek

driver.version

2.0.3

driver.version.internal

0.2

input.frequency

50.1

input.voltage

228.5

output.voltage

228.5

ups.load

014

ups.mfr

Mustek

ups.model

PowerMust

ups.status

OL

Report #2 with driver powermust (detailed comments available)

This device is known to work with driver powermust, now replaced by the blazer_ser one. It may also work with driver nutdrv_qx.

You can grab a dummy-ups compliant .dev file to simulate this device clicking here.

Some more detailed comments are available after the "Known supported…" sections.

Known supported variables

This device is known to support the following variables (values are just examples):

battery.charge

100.0

battery.voltage

13.7

battery.voltage.nominal

12.0

driver.name

powermust

driver.version

2.0.3

driver.version.internal

1.1

input.voltage

230.7

input.voltage.fault

230.7

input.voltage.maximum

231.1

input.voltage.minimum

230.7

output.frequency

50.1

output.voltage

230.7

output.voltage.target.battery

220.0

ups.delay.shutdown

2

ups.delay.start

3

ups.load

13.0

ups.mfr

Mustek

ups.model

PowerMust

ups.serial

unknown

ups.status

OL