Network UPS Tools
Power Devices support
Table of Contents

Click here to see reports of other supported models from Trust.

Note

When a user reports that a variable/command is not right then it will be highlighted by a red underline.

Bad values/ranges/etc… will get a red dashed outline or red solid left border.

The accompanying explaining comment - if provided - will be emphasized through a red dotted border on the left.

2.0.3

Report #1 with driver powermust (detailed comments available)

This device is known to work with driver powermust, now replaced by the blazer_ser one. It may also work with driver nutdrv_qx.

You can grab a dummy-ups compliant .dev file to simulate this device clicking here.

Some more detailed comments are available after the "Known supported…" sections.

Known supported variables

This device is known to support the following variables (values are just examples):

battery.charge

96.3

battery.voltage

27.1

battery.voltage.nominal

24.0

driver.name

powermust

driver.parameter.port

/dev/cuad0

driver.version

2.0.3

driver.version.internal

1.1

input.voltage

222.4

input.voltage.fault

222.8

input.voltage.maximum

224.8

input.voltage.minimum

216.6

output.frequency

50.0

output.voltage

219.9

output.voltage.target.battery

230.0

ups.delay.shutdown

20

ups.delay.start

30

ups.load

30.0

ups.mfr

Mustek

ups.model

PowerMust

ups.serial

unknown

ups.status

OL

2.0.2

Report #1 with driver powermust (detailed comments available)

This device is known to work with driver powermust, now replaced by the blazer_ser one. It may also work with driver nutdrv_qx.

You can grab a dummy-ups compliant .dev file to simulate this device clicking here.

Some more detailed comments are available after the "Known supported…" sections.

Known supported variables

This device is known to support the following variables (values are just examples):

battery.charge

100.0

battery.voltage

27.5

battery.voltage.nominal

24.0

driver.name

powermust

driver.parameter.port

/dev/ttyS0

driver.version

2.0.2

driver.version.internal

1.1

input.voltage

222.8

input.voltage.fault

222.4

input.voltage.maximum

235.3

input.voltage.minimum

216.6

output.frequency

50.1

output.voltage

221.7

output.voltage.target.battery

230.0

ups.delay.shutdown

2

ups.delay.start

3

ups.load

22.0

ups.mfr

Mustek

ups.model

PowerMust

ups.serial

unknown

ups.status

OL