Click here to see reports of other supported models from UltraMax.
|
When a user reports that a variable/command is not right then it will be highlighted by a red underline. Bad values/ranges/etc… will get a red dashed outline or red solid left border. The accompanying explaining comment - if provided - will be emphasized through a red dotted border on the left. |
2.8.0.1
Report #1 with driver nutdrv_qx (detailed comments available)
This device is known to work with driver nutdrv_qx.
You can grab a dummy-ups compliant .dev file to simulate this device clicking here.
Some more detailed comments are available after the "Known supported…" sections.
Known supported variables
This device is known to support the following variables (values are just examples):
|
battery.voltage
|
|
|
device.type
|
|
|
driver.name
|
|
|
driver.parameter.bus
|
|
|
driver.parameter.device
|
|
|
driver.parameter.pollfreq
|
|
|
driver.parameter.pollinterval
|
|
|
driver.parameter.port
|
|
|
driver.parameter.product
|
|
|
driver.parameter.productid
|
|
|
driver.parameter.synchronous
|
|
|
driver.parameter.vendor
|
|
|
driver.parameter.vendorid
|
|
|
driver.state
|
|
|
driver.version
|
|
|
driver.version.data
|
|
|
driver.version.internal
|
|
|
driver.version.usb
|
|
|
input.frequency
|
|
|
input.voltage
|
|
|
input.voltage.fault
|
|
|
output.voltage
|
|
|
ups.beeper.status
|
|
|
ups.delay.shutdown
|
|
|
ups.delay.start
|
|
|
ups.load
|
|
|
ups.productid
|
|
|
ups.status
|
|
|
ups.type
|
|
|
ups.vendorid
|
|
About this device
Reported at:
Vendor/Manufacturer information:
Further system data or configuration examples:
This device was tried with different `ups.conf` override settings
and with the default behavior. See nearby for the other reports.
Custom built from NUT master branch snapshot.#user = root
maxretry = 3
[ultramax]
driver = "nutdrv_qx"
port = "auto"
vendorid = "0665"
productid = "5161"
product = "USB to Serial"
vendor = "WCHCH544"
bus = "003"
device = "005":; sudo upsdrvctl start
Network UPS Tools - UPS driver controller 2.8.0-Windows-542-gccfb356
Network UPS Tools - Generic Q* USB/Serial driver 0.32 (2.8.0-Windows-542-gccfb356)
USB communication driver (libusb 1.0) 0.45
Using protocol: Mustek 0.07
Can't autodetect number of battery packs [-1/27.20]
Battery runtime will not be calculated (runtimecal not set)
Jan 30 10:05:11 nas nutdrv_qx[8390]: Can't autodetect number of battery packs [-1/27.20]
Jan 30 10:05:11 nas nutdrv_qx[8390]: Battery runtime will not be calculated (runtimecal not set)
Jan 30 10:05:12 nas nutdrv_qx[8570]: Startup successful
:; sudo /usr/sbin/upsmon
Network UPS Tools upsmon 2.8.0-Windows-542-gccfb356
fopen /run/upsmon.pid: No such file or directory
Could not find PID file to see if previous upsmon instance is already running!
UPS: ultramax@localhost (primary) (power value 1)
Using power down flag file /etc/killpowerReport #2 with driver nutdrv_qx (detailed comments available)
This device is known to work with driver nutdrv_qx.
You can grab a dummy-ups compliant .dev file to simulate this device clicking here.
Some more detailed comments are available after the "Known supported…" sections.
Known supported variables
This device is known to support the following variables (values are just examples):
|
battery.charge
|
|
|
battery.packs
|
|
|
battery.voltage
|
|
|
battery.voltage.high
|
|
|
battery.voltage.low
|
|
|
device.type
|
|
|
driver.name
|
|
|
driver.parameter.bus
|
|
|
driver.parameter.pollfreq
|
|
|
driver.parameter.pollinterval
|
|
|
driver.parameter.port
|
|
|
driver.parameter.product
|
|
|
driver.parameter.productid
|
|
|
driver.parameter.synchronous
|
|
|
driver.parameter.vendor
|
|
|
driver.parameter.vendorid
|
|
|
driver.state
|
|
|
driver.version
|
|
|
driver.version.data
|
|
|
driver.version.internal
|
|
|
driver.version.usb
|
|
|
input.frequency
|
|
|
input.voltage
|
|
|
input.voltage.fault
|
|
|
output.voltage
|
|
|
ups.beeper.status
|
|
|
ups.delay.shutdown
|
|
|
ups.delay.start
|
|
|
ups.load
|
|
|
ups.productid
|
|
|
ups.status
|
|
|
ups.type
|
|
|
ups.vendorid
|
|
About this device
Reported at:
Vendor/Manufacturer information:
Further system data or configuration examples:
This device was tried with different `ups.conf` override settings
and with the default behavior. See nearby for the other reports.
Custom built from NUT master branch snapshot.#user = root
maxretry = 3
[ultramax]
driver = "nutdrv_qx"
port = "auto"
vendorid = "0665"
productid = "5161"
product = "USB to Serial"
vendor = "WCHCH544"
bus = "003"
default.battery.voltage.high = 24
default.battery.voltage.low = 1
override.battery.packs = 2Report #3 with driver nutdrv_qx (detailed comments available)
This device is known to work with driver nutdrv_qx.
You can grab a dummy-ups compliant .dev file to simulate this device clicking here.
Some more detailed comments are available after the "Known supported…" sections.
Known supported variables
This device is known to support the following variables (values are just examples):
|
battery.charge
|
|
|
battery.packs
|
|
|
battery.runtime
|
|
|
battery.voltage
|
|
|
battery.voltage.high
|
|
|
battery.voltage.low
|
|
|
device.type
|
|
|
driver.name
|
|
|
driver.parameter.bus
|
|
|
driver.parameter.chargetime
|
|
|
driver.parameter.idleload
|
|
|
driver.parameter.pollfreq
|
|
|
driver.parameter.pollinterval
|
|
|
driver.parameter.port
|
|
|
driver.parameter.product
|
|
|
driver.parameter.productid
|
|
|
driver.parameter.runtimecal
|
|
|
driver.parameter.synchronous
|
|
|
driver.parameter.vendor
|
|
|
driver.parameter.vendorid
|
|
|
driver.state
|
|
|
driver.version
|
|
|
driver.version.data
|
|
|
driver.version.internal
|
|
|
driver.version.usb
|
|
|
input.frequency
|
|
|
input.voltage
|
|
|
input.voltage.fault
|
|
|
output.voltage
|
|
|
ups.beeper.status
|
|
|
ups.delay.shutdown
|
|
|
ups.delay.start
|
|
|
ups.load
|
|
|
ups.productid
|
|
|
ups.status
|
|
|
ups.type
|
|
|
ups.vendorid
|
|
About this device
Reported at:
Vendor/Manufacturer information:
Further system data or configuration examples:
This device was tried with different `ups.conf` override settings
and with the default behavior. See nearby for the other reports.
Custom built from NUT master branch snapshot.#user = nut
maxretry = 3
[ultramax]
driver = "nutdrv_qx"
port = "auto"
vendorid = "0665"
productid = "5161"
product = "USB to Serial"
vendor = "WCHCH544"
bus = "003"
default.battery.voltage.high = 24
default.battery.voltage.low = 1
override.battery.packs = 2
runtimecal = 300,100,900,50
chargetime = 21600
idleload = 10Report #4 with driver nutdrv_qx (detailed comments available)
This device is known to work with driver nutdrv_qx.
You can grab a dummy-ups compliant .dev file to simulate this device clicking here.
Some more detailed comments are available after the "Known supported…" sections.
Known supported variables
This device is known to support the following variables (values are just examples):
|
battery.charge
|
|
|
battery.packs
|
|
|
battery.runtime
|
|
|
battery.voltage
|
|
|
battery.voltage.high
|
|
|
battery.voltage.low
|
|
|
battery.voltage.nominal
|
|
|
device.type
|
|
|
driver.name
|
|
|
driver.parameter.bus
|
|
|
driver.parameter.chargetime
|
|
|
driver.parameter.idleload
|
|
|
driver.parameter.pollfreq
|
|
|
driver.parameter.pollinterval
|
|
|
driver.parameter.port
|
|
|
driver.parameter.product
|
|
|
driver.parameter.productid
|
|
|
driver.parameter.runtimecal
|
|
|
driver.parameter.synchronous
|
|
|
driver.parameter.vendor
|
|
|
driver.parameter.vendorid
|
|
|
driver.state
|
|
|
driver.version
|
|
|
driver.version.data
|
|
|
driver.version.internal
|
|
|
driver.version.usb
|
|
|
input.frequency
|
|
|
input.voltage
|
|
|
input.voltage.fault
|
|
|
output.voltage
|
|
|
ups.beeper.status
|
|
|
ups.delay.shutdown
|
|
|
ups.delay.start
|
|
|
ups.load
|
|
|
ups.productid
|
|
|
ups.status
|
|
|
ups.type
|
|
|
ups.vendorid
|
|
About this device
Reported at:
Vendor/Manufacturer information:
Further system data or configuration examples:
This device was tried with different `ups.conf` override settings
and with the default behavior. See nearby for the other reports.
Custom built from NUT master branch snapshot.
According to vendor, "Battery Type : 2 x 12volt 7Amps (INCLUDED)"
so this example tunes the tweaks for these values.#user = nut
maxretry = 3
[ultramax]
driver = "nutdrv_qx"
port = "auto"
vendorid = "0665"
productid = "5161"
product = "USB to Serial"
vendor = "WCHCH544"
bus = "003"
override.battery.voltage.high = 27.2
override.battery.voltage.nominal = 24.0
override.battery.voltage.low = 21.0
override.battery.packs = 2
runtimecal = 300,100,900,50
chargetime = 21600
idleload = 10
