If you're upgrading from an earlier version, see the UPGRADING file. For a complete and more detailed list of changes, please refer to the ChangeLog file. --------------------------------------------------------------------------- Release notes for NUT 2.7.1 - what's new since 2.6.5: - This release is an interim release, part of the testing series, and the first release after the transition from Subversion to Git. The last release (2.6.5) is almost a year old. A lot of work has been done, but a good amount remains to achieve 2.8.0 goals. Please read the UPGRADING notes. - Added support for SSL via the Mozilla NSS library, in addition to the existing OpenSSL support. - Added a new driver, nutdrv_qx, for Megatec/Qx devices. This driver will eventually replace the blazer_ser and blazer_usb drivers. In particular, it adds support for Voltronic Power devices. - Increased USB_TIMEOUT to standards-compliant 5.000 seconds in most drivers. This should reduce the number of timeouts on low-speed USB 1.1 devices. - The jNut Java source has been split into a separate GitHub repository. - Added many devices to the HCL. Of particular note are many Tripp Lite USB HID PDC models which were tested against NUT by Tripp Lite. - Reworked some visual elements of the HCL. The output is better tailored for graphical and text-only browsers, but suggestions are welcome for additional accessibility enhancements. - Also increased timeouts and added redundant commands to improve reliability of mge-utalk driver. - Added the apcupsd-ups driver to interoperate with apcupsd installations. - Added documentation on creating subdrivers for snmp-ups and nutdrv_qx. - Added new drivers for the Riello UPS product line (riello_ser/riello_usb). - Many improvements to the BCM/XCP drivers have been merged in. This includes an improved data reception loop, and additional mappings. - Added a few variables to the Powercom HID mappings. - Updated the apcsmart driver, and renamed the previous driver to apcsmart-old. - Fixed the battery percentage calculation in the bestfcom driver. - libnutclient has been added as a C++ alternative to libupsclient. - Packaging files for Solaris and HP-UX (sponsored by Eaton) - Fix shutdown of Eaton HID, using usbhid-ups and mge-shut - usbhid-ups: final fix for APC Back UPS ES. APC Back UPS ES devices have buggy firmware, and this version does not cause a regression. The max_report variable should be set automatically based on the USB identification values. - nut-scanner: fix crash - IPMI support can handle more different versions of FreeIPMI - Support power supplies scan over the network nut-scanner can now scan for power supplies with IPMI over LAN. This is currently limited to IPMI 1.5 only - Implement a framework to spell check documentation source files, using Aspell. This includes an interactive build target (make spellcheck-interactive), and an automated one (make spellcheck), mainly for QA / Buildbot purpose. Note that a base NUT dictionary is also available (docs/nut.dict), providing a glossary of terms related to power devices and management - Improve systemd integration - snmp-ups: Fixed a crash on outlet management, and added delta_ups MIB support. Also fixed mappings for upsBypassVoltage, upsBypassCurrent, and upsBypassPower in three-phase IETF MIB. --------------------------------------------------------------------------- Release notes for NUT 2.6.5 - what's new since 2.6.4: - This release fixes an important regression in upssched: any upssched.conf command that takes a second argument resulted in a defective frame sent to the parent process. Thus, the command was not executed (report and patch from Oliver Schonefeld) - Website hosting: free NUT from Eaton website hosting NUT website (http://www.networkupstools.org) is no longer hosted by Eaton. Arnaud Quette (NUT project leader) has taken over NUT hosting on his own, to give NUT back some independence. This effort is also part of a logic to stop crediting Eaton for contributions from others (especially Arnaud Quette, as an individual). The new hosting service is located, as for Arnaud's blog (http://arnaud.quette.fr) on Gandi servers, using PaaS. This will allow more flexibility and automation of the release process - macosx-ups: new OS X Power Sources meta-driver Mac OS X provides UPS status information in a format similar to what is shown for laptop batteries. This driver will convert that information into a format compatible with NUT (Charles Lepple). - support for new devices: Eaton ePDU Switched Online Zinto A (USB ID 0x06da:0x0601) REDi Blazer 400VA / 600VA / 800VA UNITEK Alpha650ipF and Alpha650ipE (USB ID 0x0f03:0x0001) - mge-shut driver has been replaced by a new implementation (newmge-shut). In case of issue with this new version, users can revert to oldmge-shut. - First NUT virtualization package: NUT now supports integration with VMware ESXI 5.0, through a native VIB package. This is, for the time being, an external effort from René Garcia (refer to the Download section on NUT website). But work is underway to improve this integration, and include it in the NUT source tree - IPMI support (nut-ipmipsu driver and nut-scanner): prepare for supporting API changes in upcoming FreeIPMI versions 1.1.x and 1.2.x. - snmp-ups now supports high precision values for APC, and more variables - the NUT variables and commands namespace has been fixed and completed, with the known and used variables that were missing. - more bugfixes, cleanup and improvements, on both source code and documentation. --------------------------------------------------------------------------- Release notes for NUT 2.6.4 - what's new since 2.6.3: - This release Fix an important vulnerability in upsd (CVE-2012-2944: upsd can be remotely crashed) NUT server (upsd), from versions 2.4.0 to 2.6.3, are exposed to crashes when receiving random data from the network. This issue is related to the way NUT parses characters, especially from the network. Non printable characters were missed from strings operation (such as strlen), but still copied to the buffer, causing an overflow. Thus, fix NUT parser, to only allow the subset Ascii charset from Space to ~ (Reported by Sebastian Pohle, Alioth bug #313636, CVE-2012-2944) A separate patch, which applies to any faulty version, is also available: http://trac.networkupstools.org/projects/nut/changeset/3633 For more information, refer to the Common Vulnerabilities and Exposures: http://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2012-2944 - A static source code analysis has been done by Michal Hlavinka from RedHat, using Coverity (12 issues fixed). - Add new "LIST CLIENTS" and "NETVER" commands to NUT network protocol. "NETVER" allows to retrieve the Network protocol version, while "LIST CLIENTS" provides the list of clients connected to a device. Refer to the developer guide, "Network protocol information" section for more information. - Support of ranges of values for writable variables has been added, to complete the existing enumerated values mechanism. This will start to appear in some drivers soon, beginning with Eaton. Refer to the developer guide, "Creating a new driver..." section for more information. - PyNUT.py has been updated to version 1.2.2, adding support for LIST CLIENTS, FSD, HELP and VER (Rene Martín Rodríguez) - support for new devices: AEG Power Solutions PROTECT HOME more APC SNMP cards ATEK Defensor range all Borri models all COVER ENERGY SA CyberPower OR700LCDRM1U, PR6000LCDRTXL5U and CP1000PFCLCD Dell UPS Network Management Card Dynamix 1000VA USB Eaton Management Card Contact (ref 66104) EVER POWERLINE RT / 11 / 31 and DUO II Pro GE Digital Energy GT Series 1000-3000 VA Gtec models all recent HP serial / USB UPS (G2, G3 and R/T models, ) and HP UPS Management Module Ippon INNOVA RT KOLFF BLACK NOVA Lexis X-power Tigra 1kVA Microline C-Lion Innova Online Yunto YQ450 PowerShield Defender 1200VA PowerWalker Online VFI LCD, Line-Interactive VI LCD and Line-Interactive VI Riello Netman Plus 102 SNMP Card Tripp-Lite OMNISMART500 - apcsmart has received some fixes to work better on Mac OS X, and in general - bcmxcp has improved support for battery status, and better supports PW9120 units - bestfortress has improved Best Fortress LI675VA support - blazer_ser and blazer_usb now try to automatically estimate high and low voltages, to be able to calculate battery charge ; support for online Innova UPS (T, RT and 3/1 T) has been added ; Best UPS support has been improved, to prepare for superseeding bestups driver - bestups has also received some care, though users are encouraged to switch to blazer_ser, since bestups will soon be deprecated. - newmge-shut has been heavilly improved. However, replacement of the current mge-shut has been postponed to the next release, due to the CVE issue. - oneac 0.80 improves support for all families of Oneac (EG, ON, OZ and OB), including more data and instant commands (Bill Elliot). - usbhid-ups: for Eaton devices, ups.start.auto is now automatically adjusted for shutdown.{return,stayoff} to behave as expected ; Liebert firmwares with incorrect exponents have also been addressed. - snmp-ups now provides support for UPS shutdown, based on usbhid-ups mechanisms (composite commands and fallback). Composite commands are also supported now. This means, for example, that if 'shutdown.return' is not supported, a combination of 'load.off' + 'load.on' may be used ; Actual validity of instant commands is now tested before commands addition ; Eaton/MGE MIB has been cleaned and completed ; 3-phases support has been added to Socomec Netvision MIB ; HP/Compaq MIB has been completed, with thresholds, nominal values and more commands. - nut-scanner now also has libupsclient has a weak runtime dependency ; more docs and bugfixes have also happened. - Provide an Uncomplicated Firewall (UFW) profile (nut.ufw.profile) - Riello protocols have been officially published in NUT protocols library: http://www.networkupstools.org/ups-protocols.html#_riello - Duplicate instances of upsd / upsmon are now detected upon startup - NUT variables namespace has been completed with missing variables and commands that are already known and standard - upslog now comes with a companion file, for logrotate configuration - more devices embed NUT for power protection, now including Thecus NAS range - more bugfixes, cleanup and improvements, on both source code and documentation, with a good bunch from Greg A. Woods. --------------------------------------------------------------------------- Release notes for NUT 2.6.3 - what's new since 2.6.2: - nut-scanner is now more portable, and provides more coherent option names. IPMI support has also been added, to discover local power supplies. This version brings weak runtime dependencies in libnutscan, which allows to compile nut-scanner with all options and to run according to the available dependencies (USB, SNMP, IPMI, ...). - libnutscan now provides pkg-config support and the needed header files are distributed. Some documentation is also available in the developer guide and manual pages have been updated and completed. - support for new devices: Cyber Power Systems with SNMP RMCARD (100, 201, 202 and 301) ; Dynamix 650VA USB ; LDLC UPS-1200D ; Tecnoware UPS ERA LCD 0.65 ; Powercom BNT-xxxAP (USB ID 0d9f:0004) ; Various USB devices using UPSilon 2000 software. - apcsmart has received minor correction. - bcmxcp_usb now handles disconnection issues and reconnection mechanism. - blazer_usb enables again inclusion of buggy USB Device and Vendor IDs in udev rules file ; language ID support has been added for USB units from LDLC, Dynamix and other no names. - nut-ipmipsu has also received some improvements. - snmp-ups has fixed outlets reported current in aphel_genesisII MIB ; MGE 3 phases handles better low battery condition ; support for Cyber Power Systems with SNMP RMCARD has been added ; support of the newer Eaton ePDUs has been improved. - upsd doesn't anymore fail to start if at least one of the listening interface is available. This is needed on systems where either IPv4 or IPv6 is disabled, and no explicit LISTEN directive has been specified. - Avahi support is now automatically enabled, upon detection - jNut (NUT Java interface) adds device discovery support, through a nut-scanner wrapper ; jNutWebAPI, a HTTP/JSON web service interface, has also been added to interact with upsd and nut-scanner. - Base files for HPUX packaging have been added. This is still a work in progress. - Compilation on IBM Aix has been fixed (namespace conflict with ctypes). - more bugfixes, cleanup and improvements, on both source code and documentation. --------------------------------------------------------------------------- Release notes for NUT 2.6.2 - what's new since 2.6.1: - NUT can now monitor power supply units (PSU) in servers, through IPMI, using the new experimental 'nut-ipmipsu' driver. Users are encouraged to test it, and send feedback and debug output to the development mailing list. This requires GNU FreeIPMI (0.8.5 or higher) development package or files. Thanks goes to Al Chu, FreeIPMI project leader, for his help during this development. - NUT now provides a tool, called 'nut-scanner', to discover supported devices, both local and remote. nut-scanner will help to ease the configuration step, and power infrastructure discovery. This development, sponsored by Eaton, supports the following methods: * USB, * SNMP, * XML/HTTP (from Eaton), * NUT servers, using the classic connect or Avahi / mDNS methods. IPMI support will be added in the next release. A separate library, called 'libnutscan', is also available to provide these feature. Future NUT releases will provides binding for the supported languages (Perl, Python and Java). - NUT now provides a Java interface called 'jNut'. This development, sponsored by Eaton, is currently limited to the client interface. But it will be broaden to device discovery and configuration in the future. For more info, refer to nut/scripts/java/README, or the developer guide (chapter 'Creating new client'). Javadoc documentation is also provided, along with Java archives (.jar) in the Download section. - support for new devices: Eaton 3S ; Cyber Power Systems CP1000AVRLCD ; various APC models equiped with APC AP9618 management card, including APC Smart-UPS RT XL ; Orvaldi 750 / 900SP ; POWEREX VI 1000 LED ; PowerWalker VI 850 LCD ; SVEN Power Pro+ series (USB ID ffff:0000). - A regression has been fixed in udev rules file. This previously caused permission issues to owners of some USB devices. - Avahi support has been added, for NUT mDNS publication, through a static service file (nut/scripts/avahi/nut.service). - usbhid-ups has had Eaton completion: some features have been improved, such as 'output.voltage.nominal' ; 3S Eco control support has been added, along with battery.runtime.low and end of battery life (life cycle monitoring) support ; new measurements for 5 PX are also supported now (outlet power factor, power, real power and current). - apcsmart has been updated to support more variables and features ; the previous driver is however still available as 'apcsmart-old', in case of issues. - bcmxcp now supports per outlet startup and shutdown delays setting ; shutdown delay is also used, when available, for outlet.n.shutdown.return instead of the default 3 seconds. - snmp-ups.c has a new initialization method, that uses sysObjectID, which is a pointer to the prefered MIB of the device, to detect supported devices. This speeds up even more init stage and should render void the use of 'mib' option. SNMP v3 session initialisation has also been fixed, and Eaton PDU support has been completed. - Initial support has been added for systemd, the System and Service Manager from RedHat. - The chapter 'NUT configuration management with Augeas' of the developer guide has received some completion: a complete Python Augeas example code is now provided. - Finally, after years of dedication to NUT, Arjen de Korte is now retired. Sincere thanks to you Arjen from us all. --------------------------------------------------------------------------- Release notes for NUT 2.6.1 - what's new since 2.6.0: - the various recent USB regressions have been definitely fixed. - NUT now propose a variable to expose UPS efficiency (ups.efficiency). Eaton 5 PX already uses it. - the Perl module from Gabor Kiss (rewritten from Kit Peters') is now distributed with NUT source code. - support for new devices: Eaton Ellipse ECO, Powerware 9140, Eaton 5 PX, and ambient sensor on Eaton ePDU managed ; GE EP series ; Inform Sinus SS 210 ; IPAR Mini Energy ME 800 ; Mustek Yukai PowerMust 1000 USB ; Numeric 3000 SW ; SVEN Power Pro+ series (recent models) ; Vivaldi EA200 LED. - liebert-esp2: Improved Liebert ESP II support, including UPS shutdown (poweroff), 1 and 3-phase input and output variables, and most input / output / bypass / nominal variables. There is also a fix for the USB to serial cable (Farkas Levente and Spiros Ioannou). - powercom has improved PowerCom BNT 1500A and BNT-other support, along with driver documentation and code conformance to the NUT rules (Keven L. Ates). - apcsmart has more improved UPS poweroff support and options (Michal Soltys). - blazer has also seen some improvements. - usbhid-ups has completed a bit supported variables for APC and Eaton / MGE. - on the quality assurance side, Eaton has worked on fixing a few non conformances, like C++ style comments and warnings, using a newly developed verification tool (Prachi Gandhi). - fix remaining references to LIBSSL_LDFLAGS, instead of LIBSSL_LIBS, which cause unresolved symbol on libupsclient users (Fabrice Coutadeur). - the website has now a better support for Internet Explorer 6. - graphic illustrations, used for the Features page on the website Features and chapter of the user manual, have been refreshed (courtesy of Eaton). - more bugfixes, cleanup and improvements, on both source code and documentation. --------------------------------------------------------------------------- Release notes for NUT 2.6.0 - what's new since 2.4.3: - the main focus of this release is the complete documentation revamping, using AsciiDoc. This includes a new website, user manual, developer guide, packager guide and manual pages, available in various formats (single and multiple pages HTML, and PDF at the moment). Be sure to check the --with-doc configure option help, and docs/configure.txt for more information. - Add Augeas support, to provide easy NUT configuration management, through tools and development APIs. For more information, refer to the developer guide, or scripts/augeas/README in the source directory. - support for new devices: APC 5G; Eaton PowerWare 5119 RM (smart mode using upscode2 driver), Eaton Best Ferrups (using older ConnectUPS card), Eaton 9395 (serial interface), Eaton ConnectUPS X / BD / E Slot; HP T1000 INTL, HP T1500 INTL, HP T750 G2, HP R1500 G2 INTL; iDowell iBox UPS; Tripp Lite SmartOnline SU1000XLA, Tripp Lite Smart1000LCD, and some more USB/HID devices IDs; CyberPower CP1500AVRLCD and CP1350AVRLCD; PowerWalker Line-Interactive VI 1400 ; Rocketfish RF-1000VA / RF-1025VA. - usbhid-ups has better support for shutting down APC SmartUPS RM series, and finally fix the "buffer size" issue, which was breaking some devices data retrieval, or truncating some data on others. - snmp-ups now support SNMP v3 and its security parameters. IETF MIB support has also been extended. - fix dummy-ups simulation driver status handling bug, and add the capability to remove exposed variables on the fly. - the belkin driver now support control commands and status reporting for beeper and battery test. - the powerpanel driver supports more older CyberPower units. - mge-utalk, upscode2, blazer and liebert-esp2 have also received some care, and been improved. - NUT-Monitor and the PyNUT client module have been updated to 1.3, adding more features like automatic connection to the first local device and i18n support. - improve configure time dependencies checking and processing. - improve older Unix systems support (HP-UX, Aix, ...) for missing functions. - refresh and improve USB helper files (udev and UPower). - more generation automation: the ChangeLog file is now generated automatically at distribution time, along with the files needed for the website hardware compatibility list. - SSL support has also received some improvements. - tcp-wrapper now allows hostnames in /etc/hosts.allow too (not only IPv4 and/or IPv6 addresses). - many bugfixes, cleanup and improvements. --------------------------------------------------------------------------- Release notes for NUT 2.4.3 - what's new since 2.4.2: - this is a bugfix release that only solves the regression on IPv6 activation. --------------------------------------------------------------------------- Release notes for NUT 2.4.2 - what's new since 2.4.1: - the general USB support has been vastly improved, including many bug fixes, better OS support, new features and devices. - NUT now talks to Solar Controller Devices with the new ivtscd driver. - the snmp-ups driver supports more PDU, with a smaller disk footprint. - apcsmart supports more older SmartUPS and Matrix units. - the bestfortress driver is resurrected. - the virtual driver has been renamed to 'clone'. - the netxml-ups driver has received some care. - various debugging and development improvements have been done, around driver output; dummy-ups with more interaction and scripting and the device-recorder.sh script. - the build system has received many bugfixes and improvements. - the UPower (previously known as DeviceKit-power) rules file is now generated by NUT. - support for new devices: Apollo 1000A and 1000F; various Baytech RPC; old Best Power Fortress; Cyber Power Systems PR3000E, CP 1500C and OR2200LCDRM2U; all the new Dell UPS range (serial, USB and network); Eaton E Series NV and DX UPS, and Powerware 9130; older HP T500 and T750, newer T750 INTL (USB) and R1500 G2 (serial); Inform Informer Compact 1000VA; many serial and USB devices from Ippon, like Back Comfo Pro, Smart Power Pro and Smart Winner; IVT SCD series; Liebert GXT2-3000RT230 and PowerSure PSA; Mustek PowerMust 424 / 636 / 848 USB; all new PowerCOM USB devices with HID PDC interface; Tripp-Lite INTERNETOFFICE700, SMART700USB and ECO550UPS; UPSonic DS-800 (USB). --------------------------------------------------------------------------- Release notes for NUT 2.4.1 - what's new since 2.4.0: - the microdowell driver has appeared to support various MicroDowell Enterprise units (see the "new devices" list below). - support for new devices: MicroDowell Enterprise B8, B10, N8, N11, N15, N20, N22, N30, N40, N50, N60 and HiBox ST. - NUT-Monitor now better handles the ups.status field, and has switched to version 1.1. - the situation of the build toolchain has been fixed, with regard to the "make clean" target and the wrongly removed generated USB files. This brokes further configure call. --------------------------------------------------------------------------- Release notes for NUT 2.4.0 - what's new since 2.2.2: - preliminary support for Power Distribution Units (PDUs): NUT now support PDUs, either natively (ie using NUT snmp-ups driver), or through a binding to the Powerman daemon. The list of supported PDUs is already quite long, including: Eaton ePDUs (Managed and Monitored), some Aphel models, some Raritan PDUs, and the whole list of Powerman supported devices: http://powerman.sourceforge.net/supported.html - support for new devices: the various PDUs cited above, Chloride Desk Power 650, Cyber Power Systems Value 400E/600E/800E (USB models), Delta GES602N, Digitus DN-170020, the whole Eaton ranges (mostly composed of MGE Office Protection Systems and Powerware units) including BladeUPS, Forza Power Technologies SL-1001, HP PowerTrust 2997A, HP R/T 2200 G2, Infosec XP 1000 and XP 500, Ippon Back Power Pro (serial and USB), Kebo 1200D/D Series, Liebert PowerSure Personal XT, MGE Office Protection Systems Protection Station, Neus 400va and 600va, Phasak 400VA and 600VA, Plexus 500VA, Powercom Black Knight PRO / King PRO and Imperial, PowerKinetics BlackOut Buster, Sweex 1000 USB, UNITEK Alpha 500, WinPower CPM-800. - NUT now embeds Python client support through the PyNUTClient module and the NUT-Monitor application. Both are from David Goncalves, and are still available from http://www.lestat.st. For more information, refer to scripts/python/README. - the dummy-ups driver now support a "repeater" mode. This allows it to act as a NUT client, and to forward data. This can be useful for supervision and load sharing purposes. - tcp-wrappers support has been added to the upsd server, to grant users access by source IP for commands that require to be logged into the server. This replaces the previous internal implementation (ACL in upsd.conf). - the nut.conf file has been introduced to standardize startup configuration across the various systems. - NUT now ships a bash completion function for 'upsc' command (scripts/misc/nut.bash_completion). Simply copy it to /etc/bash_completion.d - many internal changes to improve maintenability, while lowering the maintenance cost (thus allowing developers to focus on what matters: the code!). Examples of this are: - the USB information automatic extraction to generate the various USB helper files, - the upsdrv_info_t structure to track more driver information, and remove the need for the upsdrv_banner() function - common USB code refactoring, as it is done for the serial functions. - tons of bugfixes, cleanup and improvements to make NUT stronger than ever! --------------------------------------------------------------------------- Release notes for NUT 2.2.2 - what's new since 2.2.1: - support for new devices: APC BACK-UPS XS LCD, Atlantis Land, Mustek Powermust Office 650, Oneac XAU models, Powerware PW5115 and PW9120 (USB), Nitram Elite 2005 - Integrated Power Management (NUT HAL integration) has reached a major milestone: it is now the most advanced UPS integration into Power Management layer known in existing OSs. It has received many corrections and improvements, and allows to PowerOff the UPS at the end of a power cycle (which is the most important feature, not supported on other systems). The various files are now installed into the correct location. - the usbhid-ups driver has received attention. Most notably, the shutdown handling has been reworked, and support for MGE UPS SYSTEMS 3 phases units has been added. - snmp-ups now supports MGE* Environment Sensor (ref 66 846). The ambient.temperature reporting has also been fixed for units other than APC. - the netxml-ups driver has appeared to support MGE* network HTTP/XML cards. - NUT now distributes by default the shared version of libupsclient (version 1.0.0), and use this for the provided clients (upsmon, upsc, upsrw, upscmd). This is part of an effort to reduce NUT's footprint, both on disk and in memory. - powerpanel has reach a new step toward the replacement of nitram and cpsups drivers. The final step is scheduled for NUT 2.4. - many changes, cleanup and fixes to the NUT core and various drivers. --------------------------------------------------------------------------- Release notes for NUT 2.2.1 - what's new since 2.2.0: - support for new devices: all MGE Office Protection Systems units, Advice TopGuard 2000, Belkin F6H375-USB, Dynamix UPS1700D, Effekta RM2000MH, Jageson Technology Jasuny USPS, Powercom SMK-1500A and SXL-1500A, PowerWalker Line-Interactive VI 400/800 and 600, Powerware 9110, UNITEK Alpha 2600, UPSonic CXR1000, some vintage serial APC UPSs. - the usbhid-ups driver has been improved, and fixed in many areas, through a backport of the development (trunk) version. - the udev rules, for Linux hotplug support of the USB UPSs, has been updated to support kernel newer than 2.6.22. - the megatec and megatec_usb drivers have also been backported from the development (trunk) version. - the client development files have also received some care: the upsclient pkg-config file has been fixed, and the upsclient.h file allows older NUT clients to continue using the UPSCONN structure. --------------------------------------------------------------------------- Release notes for NUT 2.2.0 - what's new since 2.0.5: - The new build infrastructure, using automake, is now used. This has major impact on the compilation and installation procedures, and thus on the NUT packaging. For more information, refer to UPGRADING and packaging/debian/ for an example of migration. - NUT now provides support for FreeDesktop Hardware Abstraction Layer (HAL) which brings full Plug And Play experience to USB UPS owners. For more information, refer to docs/nut-hal.txt. - support for new devices: Ablerex 625L, ActivePower 400VA, 2000VA; Belkin Home Office F6H350-SER, F6H500-SER, F6H650-SER; Belkin Office Series F6C550-AVR; Belkin Universal UPS F6C100-UNV (USB), F6C1100-UNV (USB), F6C1200-UNV (USB), F6H350deUNV (serial), F6H350ukUNV (serial), F6H650ukUNV (serial); Compaq R3000h; Cyber Power Systems PR2200; Dynex DX-800U; Geek Squad GS1285U; Krauler UP-M500VA; Mecer ME-2000; MGE UPS SYSTEMS Ellipse MAX; Online Zinto D; PowerTech SMK-800; SVEN Power Pro+ series, Power Smart RM 2000; Tripp-Lite SmartOnline SU1500RTXL2ua, smart2200RMXL2U. - added IPv6 support, - the newmge-shut driver has appeared. This one uses the same HID core as usbhid-ups, but communicate over a serial link. It will eventually replace the current mge-shut driver. - client commands (upsc, upsrw and upscmd): hostname is now optional, and defaults to "localhost" - many drivers have been improved and have received bug fixes: powerpanel, megatec, megatec_usb, safenet, tripplite_usb, gamatronic, - the hotplug and udev scripts, in charge of setting the right permissions on the USB devices, are now installed automatically when appropriate. - more generally, the NUT core and documentation, including the manpages, have been improved and updated. --------------------------------------------------------------------------- Release notes for NUT 2.0.5 - what's new since 2.0.4: This release is a backport of the development version. Many changes have already been backported previously. Thus it is more a synchronisation release, though it includes many bugfixes and support for new models. - support for new devices: APC Smart-UPS with 6TI firmware; Belkin Small Enterprise F6C1500-TW-RK; Compaq R3000 XR, R5500 XR; Cyber Power 550SL, 725SL, 685AVR, 800AVR, 1200AVR, AE550; Eltek; Inform GUARD; Microsol Rhino; Opti-UPS PowerES 420E; PowerMan RealSmart, BackPro; Powerware PW9315 3-phase; SOLA 305; Tripp-Lite SMART550USB, SMART2200RMXL2U, OMNI1000LCD, OMNI900LCD, OMNI650LCD, 1500 LCD, AVR550U; Viewsonic PowerES 420E. - bcmxcp: added 3-phase support - megatec: better hardware support, more instant commands - mge-hid: support more instant commands - newhidups: fixed APC and Tripp Lite bugs, various memory bugs, improved report buffering, improved Solaris support, added '-x explore' option for easy diagnosis of new devices - solis: shutdown programming, support new cables, Solaris support - tripplite_usb: updated SMARTPRO support, fixed OL/OB reporting, better error handling, some memory bugs - new dummy-ups driver simulator - added HTML interface for access to CGI scripts --------------------------------------------------------------------------- Release notes for NUT 2.0.4 - what's new since 2.0.3: - The newhidups critical bug (segmentation fault) has been fixed. It has also received some more care, like buxfixes and new models support and enhancement for Solaris. [Peter Selinger and Arnaud Quette] - A bug has been fixed in NUT core to support resuming from suspend-to-disk. This should also fix other similar issues, like time synchronisation through the NTP - Network Time Protocol. [Arjen de Korte] - The mge-shut driver now better detects the Low Battery status, support new models and fixes some wrong status and data. It also fixes some issue where the UPS wasn't restarting (refer to mge-shut manpage). [Arnaud Quette] - The genericups custom configuration through ups.conf is working again [Arjen de Korte] - The genericups driver type 22 also support CyberPower 725SL (and maybe others SL models) [David Kaufman] - The new megatec driver, which will replace a bunch of drivers by nut 2.2 (refer to docs/megatec.txt and UPGRADING) has been backported from the trunk (Development tree). The powermust driver has also received some attention. [Carlos Rodrigues] - The new rhino driver was added to support Microsol Rhino UPS hardware The solis has also been improved for solaris compatibility, and internal / external shutdown programming. solis can now save external shutdown programming to ups, and support new cables for solis 3 [Silvino B. Magalhães] - Several fixes and improvements have been made to upsrw, upsset, cpsups, tripplite_usb and the FAQ. [Arjen de Korte and Charles Lepple] --------------------------------------------------------------------------- Release notes for NUT 2.0.3 - what's new since 2.0.2: - The recent and major newhidups changes have been backported from the Development tree. It now: - supports models from MGE UPS SYSTEMS, APC and Belkin. Mustek and Unitek units are also recognized for development purpose, - handles better device reopening, after a disconnection, - handles multiple devices, with several parameters to find the right UPS. [Peter Selinger, Charles Lepple and Arnaud Quette] - The bcmxcp_usb driver has been added to support Powerware USB units. [Wolfgang Ocker and Kjell Claesson] - The tripplite_usb driver has been added to support Tripp Lite USB units. [Charles Lepple] - The sec driver is back as gamatronic [Gamatronic, Nadav Moskovitch] - The genericups driver has received official care from Gamatronic to add support for the Gamatronic UPS with alarm interface. [Gamatronic, Nadav Moskovitch] - The powermust driver now supports Soyntec Sekury C 500 and C 800 units. [Hanno Borns] - The mge-shut driver has received a bit of attention too, and enhance ups.model retrieval for some specific case (release 0.65) - The drivers don't change to the "statepath" directory anymore at initialisation time if called using -k. This avoid unneeded failure to poweroff the UPS if /var is already unmounted. [Gaspar Bakos] - The belkinunv driver now supports Belkin F6C1100-UNV [Dave Breiland] - The isbmex driver has been upgraded to version 0.05, which fixes various errors in formulas, add shutdown capability and revert back baudrate to B9600 (instead of B2400), as it broke the communication [Ricardo Martinezgarza] - The support of Sysgration UPGUARDS Pro650 in fentonups has been fixed [Simon J. Rowe] - The packaging files for Red Hat have received various fixes [Thomas Jarosch] - The solis driver has been fixed to avoid a naming colision and compile on Solaris [Paweł Kierdelewicz] - The snmp-ups driver has corrected the problem when exposing certain time data. --------------------------------------------------------------------------- Release notes for NUT 2.0.2 - what's new since 2.0.1: - the newhidups USB driver has been improved a lot and is no more experimental. It also now has a basic APC support, which will soon replace the legacy hidups driver. - The mge-utalk driver has improved its support for old units. - The mge-shut driver has been improved for restart/shutdown sequences which was previously blocking the serial port. - The general MGE support has been added Pulsar EXtreme C / EX RT, Comet EX RT, Pulsar SV, Pulsar PSX, Ellipse Office and NOVA AVR USB. - The genericups driver now supports Generic RUPS 2000, AEC MiniGuard UPS 700 (using Megatec M2501 cable), and Powerware 3110. [Nick Barnes, Paul Andreassen] - The powermust driver now supports SquareOne Power QP1000, Mustek PowerMust 1400VA Plus and 2000VA USB. [Carlos Rodrigues] - The fentonups driver has been enhanced and now supports Sysgration UPGUARDS Pro650. [Michel Bouissou, Simon J. Rowe] - The cpsups driver now supports MicroDowell B.Box BP 500/750/1000/1500. [Armin Diehl] - The snmp-ups driver now supports Socomec SNMP devices (Netvision MIB), and Powerware ConnectUPS SNMP cards. [Thanos Chatziathanassiou, Olli Salvia] - The bcmxcp driver is back with support for Powerware UPSs. [Tore Øpetveit, Kjell Claesson] - The cyberpower driver now supports CyberPower 1000AVR. [Dave Huang] - The new solis driver supports Microsol units: Solis 1.0, 1.5, 2.0 and 3.0. [Silvino B. Magalhaes] - The apcsmart driver has fixed APC600 support. - The etapro driver fixes brokeness due to ser_get_line use [Marek Michalkiewicz] - The new upscode2 driver supports Fiskars, Compaq and Powerware devices. [Niels Baggesen, Havard Lygre] - The tripplite driver has fixed a battery charge bug [Cedric Tefft] --------------------------------------------------------------------------- Release notes for NUT 2.0.1 - what's new since 2.0.0: - The bestuferrups driver has been forked into the new bestfcom driver which has better handling of the inverter status alarm messages and more. [Kent Hill] - Mustek UPS support returns with two drivers which have overlapping coverage: mustek and powermust. [powermust: Carlos Rodrigues, mustek: Martin Hajduch] - Additional CyberPower Systems hardware is supported with the new cpsups driver. Three recognized models are the CPS1500AVR, CPS1100VA, and OP500TE. [Walt Holman, Brad Sawatzky] - The genericups driver can now generate staleness warnings in specific cases where the UPS provides a way to test for its presence. See the "CON" setting in ups.conf for more details. [stan / saticed.me.uk] - Documentation for monitoring a Back-UPS RS 500 on a system without USB ports has been added to the cables directory. [Martin Edlman] - The everups driver now supports types 73-76 (NET 700/1000/1400/500-DPC) [hunter] - The new metasys driver supports Meta System models: Line, HF Millennium, HF Top Line, ECO Network, ECO, Ally HF, Megaline [BlaXwan] - The ippon driver now allows user-defined settings for the delay before switching off, and the delay before powering on. [Yuri Elizarov] - The victronups driver is now at version 0.1.9, which adds many instant commands: calibration control, battery and front panel tests, and bypass control. [Gert Lynge] - The tripplite driver has recieved a major overhaul to bring it up to working condition for the 2.0 tree, including code cleanups, several new variables, commands, and user-definable parameters. See ChangeLog for more. [Nicholas J Kain] - The mge-utalk driver has been upgraded to version 0.81, which fixes the lack of read-write variables and loss of sync on models which don't support restoring settings. [Arnaud Quette] - The Micro Ferrups model RE is now supported by the bestuferrups driver. The driver will also now read the ambient temperature and will no longer constantly report the data as stale. [Tim Thompson] - The fentonups driver's init sequence has been reworked to work better with some hardware, including a fix to the parser code. [MLH] - A workaround has been added to the hidups driver to avoid variables which are stuck by calling HIDIOCINITREPORT in every poll. [Stuart D. Gathman] - SOLA 610 UPS hardware and others which do not support the ID command may now be monitored by the bestups driver after forcing ID= in ups.conf. [Jason White] - "pollinterval" is now available via driver.parameter for consistency. [Arnaud Quette] - The mge-shut and newhidups drivers, along with the supporting hidparser/libhid code have received many updates, including lowering USB bandwidth consumption, driver unbinding (only in Linux), code cleanups, and more which can be seen in the ChangeLog file. [Arnaud Quette] - The fentonups driver now recognizes several more Megatec protocol units: SuperPower HP360, Hope-550 [Denis Zaika] Unitek Alpha 1000is [Antoine Cuvellard] - Some variables like uc_sigmask were renamed to avoid clashes with symbols on systems like HP/UX. - All man pages have been reworked to switch literal "-" characters to hyphens or "\-" as appropriate. [Shaul Karl] - upssched's CANCEL events were broken following the change to text-based socket messages in 1.5 and have been fixed. [Steven Schoch] - Calls to varargs functions with raw strings from the config files without an intervening "%s" have been fixed in upsmon, upssched, snmp-ups and upsd. [Ulf Harnhammar] --------------------------------------------------------------------------- Release notes for NUT 2.0.0 - what's new since 1.4.x: - The new naming scheme for variables and commands (introduced in 1.4) is now mandatory. The 1.4 tree supported both the old (STATUS) and the new (ups.status) as a transitional release, and now that time is over. This means that 2.0 is generally smaller than 1.4 code, since the interim compatibility hacks have been removed. - New serial handling code has been added, with greatly simplified operations. The old mess involving repeated calls to sigaction, alarm, and read has been condensed to a select-read loop. This change allows drivers which don't do any serial communications at all (hidups, snmp-ups) to drop that baggage, so they are a bit smaller when compiled. - The drivers now recognize "chroot=' and 'user=' in the global section of ups.conf. This means you don't have to use -r and -u when starting upsdrvctl. - upsmon now supports the -K argument to check for the presence of the POWERDOWNFLAG file. If it exists and contains the magic string, then upsmon will exit(EXIT_SUCCESS). Otherwise, it will exit(EXIT_FAILURE). This feature can be used to simplify shutdown scripts, since now you don't have to keep the script in sync with the upsmon.conf. - Many small things like signed value comparisons, int vs. size_t and proper use of const/struct were fixed throughout the source. These were mostly for correctness, but a few potential bugs involving very big or very small numbers were fixed at the same time. - The access control system in upsd.conf has been reworked and simplified. Since access levels have become meaningless in recent releases, the new system is just ACCEPT or REJECT . If you are upgrading from a previous version of the software, you will have to edit your upsd.conf to use this method. See the UPGRADING file for more details. - The build process now halts when make fails in one of the subdirectories. [Petter Reinholdtsen, Charles Lepple] - Helper data for using upsclient via pkgconfig is now created if pkgconfig is detected when configure runs. [Arnaud Quette] - The polling interval in drivers may now be set with 'pollinterval' in ups.conf. [Gabriel Faber] - Blazer UPS equipment is now supported with the blazer driver. [Phil Hutton] - Energizer USB UPS hardware is now supported on Linux with a new experimental driver. [Viktor T. Toth] - The newhidups driver has been merged as the first step towards portable USB UPS support. This will eventually replace the old Linux-only hidups driver. The newhidups driver is tagged experimental since it is under active development. [Arnaud Quette, Charles Lepple] - The newapc driver has been renamed to apcsmart, replacing the old driver with that name. If you used the newapc driver, be sure to delete the old binary and fix your ups.conf. - The apcsmart driver now supports asynchronous notification data from the hardware, which means it can wake up as soon as something happens. This affects the OL/OB/LB/RB data in ups.status, and generally reduces the latency in dispatching status changes by a few seconds. - The apcsmart driver can now support quirky hardware which does not provide the usual listing of valid command characters. This feature is necessary to monitor new models like the APC CS 350 and old ones like the Matrix 5000. It also now has sdtype=4 to handle the strange shutdown behavior on the CS series. - The belkin driver now works around broken firmware version 001, avoiding a lengthy delay at startup. It also implements the shutdown sequence differently, and should actually work on more hardware now. - The bestups driver has been slowed down to play nicer with the hardware, and is much more reliable as a result. Among other things, it should always detect the UPS on the first try, meaning no more "dot dot dot" when it starts. - The cyberpower driver is no longer tagged experimental, and now supports powering off the load. It also supports battery tests via instcmds. - Effekta MT 2000 RM hardware is now supported by the fentonups driver. [christoph moar] - The new safenet driver supports UPS hardware that uses the protocol of the same name. This includes models from many manufacturers, including Fairstone, Fenton, Gemini, Powerwell, Repotec, Soltec and Sweex. See the README or driver.list for the full details. [Arjen de Korte] - The genericups driver now has type 20 to monitor the Powerware 5119 RM. See http://lists.exploits.org/ups/Oct2003/00052.html. [Daniel Thompson] - The belkinunv driver has been added to allow monitoring Belkin Universal UPS hardware. [Peter Selinger] - Cyber Power Systems 1100AVR hardware which has a different protocol than the existing binary type (supported by 'cyberpower') is now supported by the experimental cyberpower1100 driver. [Walt Holman] - upsdrvctl now returns success or failure information in the exit code. Any failure during a requested operation will result in a nonzero value (specifically EXIT_FAILURE). --------------------------------------------------------------------------- Release notes for NUT 1.4.0 - what's new since 1.2.x: - The drivers and upsd now communicate over Unix domain sockets instead of state files, shared memory, or state files with mmap. This change makes many things possible, including the new dynamic variable and command naming scheme described below. There is a new development tool called sockdebug in the server directory for debugging driver-server communications on the sockets. - The old static variable scheme has been replaced by a new dynamic implementation. Vague names have been turned into meaningful names that fit into an organized system. UTILITY is now input.voltage. OUTVOLT is now output.voltage. This also applies to the names of instant commands. BTEST1 is test.battery.start, and BTEST0 is test.battery.stop. The old names are still supported for compatibility with older clients. This compatibility mode will be maintained throughout the 1.4 series, and will be gone by the release of 2.0. Users with older clients are encouraged to upgrade their software during this time. - The network protocol has been expanded to handle these new names. Older functions which only apply to the old names will continue to be supported through the 1.4 series. - The drivers and server (upsd) can now change their user ids and chroot themselves with the new -u and -r arguments. This lets you create a "chroot jail" with the bare minimum components. This technique is used to provide a higher degree of security. If someone exploited upsd to get a shell somehow, they would be stuck in the jail. - upssched now explicitly confirms reception of timer commands before exiting. This was done to avoid a race where one process would exit right when another one was starting. The second one would believe its command had been handled when it had been lost. - upslog has been reworked to use standard getopt parsing to provide the monitoring settings. The old way of specifying arguments is still supported for backwards compatibility. upslog has also been changed to only parse the format string once, rather than doing it every time through the loop. This should provide a minuscule drop in CPU utilization. - Usernames are now required in upsmon and upsd. This means that you must add a username to your MONITOR lines in upsmon.conf and then create a matching user in upsd.users. Installations from the 1.2 era probably already use usernames, so this mostly affects those from 1.0 and before. - Drivers are now pinged regularly by upsd when they aren't posting updates about the UPS status. This provides another check in the data validation process. If upsd fails to get a response within a few seconds, the UPS will be marked stale. - A few minor memory leaks were discovered with valgrind and squashed. - upsstats now reuses connections to upsd when cycling through multiple entries in the hosts.conf. This makes things a bit faster and avoids some of the noise in the syslog. This only applies to entries that are adjacent. To take advantage of this feature, you may have to rearrange them. MONITOR ups-1@host-1 ... MONITOR ups-1@host-2 ... MONITOR ups-2@host-2 ... MONITOR ups-3@host-3 ... Connection reuse for nonadjacent entries may be considered in the future. - upsd now warns about insecure configuration files at startup. These files (upsd.conf, upsd.users, and the certfile) should only be readable by upsd. Never make them world-readable. - The programs no longer print "shutting down" when they are just exiting. This was changed to avoid confusion about the term, since "shutting down" has a special meaning in UPS software. - Signal handlers no longer do any significant amount of work. Some of the programs used to do numerous things in there, raising concerns about reentrancy. They now set flags and allow the main loop to do the actual work from there. - A bug in upsmon where NOTIFYFLAG settings could be ignored was fixed. - Group handling has been changed. configure no longer accepts --with-group, and the programs no longer setgid() to a hardcoded value. They now setgid() to the primary group of whatever the user value may be. This may be compiled in with --with-user as before, and many programs accept -u to override it at runtime. - The state path is no longer created during 'make install'. Users are now expected to create it themselves. This removes a lot of evil complexity from the build and install sequences. - upsd no longer implements the DROP access command, as it could confuse the clients by getting them out of sync. DROP is now implemented as DENY, which sends an error message. If you use DROP, you should change it to DENY rather than relying on this compatibility measure. - The belkin driver no longer reports OFF and OL at the same time. - The bestups driver no longer sleeps during polls, which makes it more responsive to things like instant commands. - The cyberpower driver now has much better hardware detection code and no longer freezes at startup under some conditions. It also now supports the shutdown function. Instant commands for shutdowns and battery tests were also added. - The dummyups testing driver has been removed. The dummycons testing driver can do everything that dummyups once did and much more. dummycons is also now built by default for easier testing. - The newapc driver has been reworked to take advantage of the new internal driver state functions. Some variables without an obvious purpose were dropped. - The newapc driver now sends all five bytes when using sdtype 1. Previously it didn't send the entire string, and it didn't work. [Don Lewis] - The hidups driver has been expanded to allow for setting variables, a shutdown sequence, and more. [Arnaud Quette] - The mge-utalk driver had trouble establishing communications in some cases due to the RTS line being set. This has been fixed. The mge-shut driver has been added to the tree, and has replaced the older mge-ellipse driver. [Arnaud Quette, Philippe Marzouk] - Outlet-level control has been defined in the variable tree, and will be added to drivers where the hardware supports it. This can be used to shut down some components earlier than others to prolong your runtime on battery. This is supported in the mge-shut driver now, and may show up in others before long. [Arnaud Quette] - KIN-2200AP hardware is now recognized by the powercom driver. This change may also support other KIN-xxxxAP equipment. [Preston A. Elder] - The 1.1kVA UPS is now supported by the bestuferrups driver. This driver was also changed to allow easy addition of more models in the future. [Bob Apodaca] - The fentonups driver can now handle devices which implement the "I" detection differently, and now supports the Giant/WELI 500 as a result. [Joon Guillen] - The serial number of the UPS being monitored can now be specified with serial= in ups.conf in the genericups driver. [Shaul Karl] - The newapc driver now sends ESC to break out of menus when the initial detection fails. Some new APC models have interactive menus on the serial port, and the driver couldn't handle them before. - The snmp-ups driver now reports ambient temperature and humidity data for APC equipment. It also now supports the shutdown.reboot and shutdown.reboot.graceful commands. [Dmitry Frolov] - The list of supported variables and commands in the snmp-ups driver has been expanded. [Arnaud Quette, J.W. Hoogervorst] - Various drivers now report bypass mode with the BYP status word. [Arnaud Quette] - Energy Sistem equipment is now supported with the esupssmart driver. [Antonio Trujillo Coronado] - The Tripp-Lite SU series (SmartOnline) is supported with the new tripplitesu driver. [Allan Hessenflow] - The HP PowerTrust A2994A is now recognized by the hp driver. [Jan Sporbeck] - Many drivers were cleaned up to perform basic sanity checks on the status data before using it. - An explicit cleanup function has been added to the driver core to ensure that all dynamic resources are freed before exiting. This is part of the larger process to check for memory leaks and other bad things. [Arnaud Quette] - upsd now provides variable descriptions from an auxiliary file. This file is optional, which allows for a smaller memory footprint. It can also be edited for localization or other customizations. - upsimage and upsstats can now render BATTVOLT data. [Andrew R. Ghali] - String handling has been cleaned up throughout the tree. Calls to functions like strcpy and strcat were either replaced with other (range-checking) functions or were rewritten to avoid it. - Many compile-time defaults may now be overridden at runtime. In the environment NUT_CONFPATH and NUT_STATEPATH may be used. upsdrvctl has been changed to execve to pass these along to the drivers. ups.conf now supports driverpath=, and upsd.conf supports DATAPATH. [Bryan Henderson] - The configure --with-gd switches now actually do something useful when gd has been installed outside the default search directories. [Patrik Schindler] - The inline keyword is now handled properly on systems which do not support it or have it specified as another name. This was breaking compiles on some systems. [Petter Reinholdtsen] --------------------------------------------------------------------------- Release notes for NUT 1.2.2 - what's new since 1.2.1: - The snmp-ups driver has been upgraded and expanded. It now supports multiple MIBs, meaning it can handle RFC 1628, APCC, and MGE equipment. You can pick the right one with "mibs=" in ups.conf. Support for setting variable and instant commands is also available. [Arnaud Quette and Dmitry Frolov] - The powernet driver has been upgraded. It now supports more variables, has cleaner logging, and may now be considered stable. [Dmitry Frolov] - The hidups driver now supports physical port IDs. This avoids most of the problems where the hiddev* names can jump around too easily. It will now stay in the same place as long as you keep it plugged into the same physical port. See the ChangeLog file for more details. [David Brownell] - The hidups driver now also supports the MFR variable on APC Back-UPS ES equipment. [Jonathan A. Davis] - The sms driver has been updated to version 0.70. [Marcio Gomes] - The bestups driver now recognizes Best Power Axxium Rackmount equipment. [Ales Casar] - The liebert driver now uses O_NONBLOCK, and should now work consistently on OpenBSD as a result. [Alex Cichowski] - The liebert driver also now uses debouncing logic on the status lines. It was possible to get false readings that would start a shutdown or just annoy users with excessive onbatt/online notify messages. The new code forces the status to settle down for 3 polls before accepting the new value. This means that very short power events may not be detected. The alternative is having your machine shut down just because it decided to wiggle over to OB LB for a few seconds. - upsmon has had the disconnect logic fixed so the "communications lost" (COMMBAD) notify will actually go out when the connection fails. [Steve Monett] - upssched now uses a lock file to prevent a race where two could start at the same time. The second upssched would "win", and the first one would be unreachable. This had the side-effect of not being able to cancel timers on the first one. If you use upssched, you must define the LOCKFN directive when upgrading to this version, or it will not work. [Gaspar Bakos] - The packaging and scripts for Red Hat systems have been updated. [Antonino Albanese] - upsd is now a bit more lenient about access levels in the 'numlogins' check, which is what caused the problem in upsmon (next item). - upsmon no longer gets stuck in slavesync() when upsd is configured to drop certain queries. This usually happened at the worst possible time: in the middle of a shutdown. [John David Garza] - The upsclient functions now do more sanity checking on data from upsd so a short read won't return garbage to the callers. - upsset now works properly with ENUM/VARTYPE values for multiple UPSes on a single upsd. [Dmitry Frolov] - Various portability fixes for building on SGI were applied. [Andrea Suatoni] - upsd no longer tries to reference a deleted client structure if the client disconnects at the wrong time. Previously, it tried to use that pointer after the sendback() function had already failed on write and deleted the client. This could cause upsd to segfault depending on what areas were accessed. [Patrik Schindler] --------------------------------------------------------------------------- Release notes for NUT 1.2.1 - what's new since 1.2.0: - The sms driver is back, with support for Microlink Manager III hardware. [Marcio Gomes] - Fideltronik Ares Series hardware is now supported as genericups type 19. [Tomek Orzechowski and Arkadiusz Mikiewicz] - The drivers no longer silently drop instant commands or set commands from upsd that happen to get fragmented in transit. [linux@horizon.com] - The old multilink driver is back with a new name: liebert. It supports Liebert UPStation GXE hardware with the contact-closure cable. This is currently an experimental driver as there is no way to power down the load. - configure now picks up the right flags for gd automatically if gd 2.0.8 or higher is installed. This greatly simplifies the CGI build process for most users. - Shutdowns on FreeBSD using the genericups driver should work again. [Petri Riihikallio] ---------------------------------------------------------------------------